Are you fed up with an old, inefficient water filter in your Frigidaire refrigerator? The good news is that you can quickly and easily change the water filter yourself. It’s a simple task that only takes a few minutes, and it can dramatically improve the taste and quality of your water.
This guide will take you through the steps to safely and successfully remove an old filter and install a new one. It includes helpful tips for getting the job done quickly, as well as advice on how to prevent any problems from arising.
So let’s get started. Here’s everything you need to know about changing a water filter in a Frigidaire refrigerator.
What Is a Frigidaire Water Filter?
Frigidaire offers water filters for water filtration devices designed to fit Frigidaire Pure Source Ultra refrigerators. These filters use a combination of activated carbon to reduce up to 99% of contaminants, including chlorine, lead, and microbial cysts. With up to a six-month life span, these filters help ensure that you have clean and safe drinking water.
Which Contaminants Can a Frigidaire Water Filter Remove?
Frigidaire water filters are designed to reduce impurities from your drinking water and ice cubes. These include:
- Chlorine: Chlorine can cause an unpleasant taste and odor in water, but more importantly can be harmful if consumed over time.
- Lead: Lead is found in many sources including pipes and contaminated soil and can pose serious health risks if not filtered out of your drinking water.
- Microbial Cysts: These are disease-causing agents that can make their way into your drinking water if not properly filtered out.
How to Change the Water Filter in Your Frigidaire Refrigerator
In order to keep the water from your refrigerator tasting fresh and clear, you need to change your Frigidaire Water Filter on a regular basis. Generally, it is recommended that you replace it every six months for optimum performance.
The process for changing the filter is quite simple:
- Locate the filter – Most filters are located in either the grille at the base of the refrigerator or in the back upper-right corner of the inside wall.
- Shut off the icemaker – Make sure to turn off your icemaker before replacing your water filter. This can be done by pressing and holding the “Crushed/Cubed” and “On/Off” buttons simultaneously until you hear a short beep sound.
- Remove old filter – Pull out your old filter by turning it counterclockwise and discard it properly according to local regulations.
- Install new filter – Insert a new filter into its housing and twist until secure. If needed, refer to your owner’s manual for additional installation instructions.
- Reset icemaker – After installing, press and hold both “Crushed/Cubed” and “On/Off” buttons again until you hear a short beep sound. This will reset your icemaker and allow it to begin producing ice again.
Common Problems With Frigidaire Water Filters
There are several common problems associated with Frigidaire water filters that you need to be aware of before changing your filter.
Filter Not Properly Aligned in Base
If the water filter is not properly aligned in the base, it can cause a number of issues, including water flow being restricted. To ensure proper filter alignment, double-check that the filter is securely fitted into the base before using it.
Clogged Water Filter
A clogged water filter can restrict the flow of water. To prevent this, check and replace your filters regularly according to manufacturer specifications; this will ensure that your water is filtered properly and prevents any buildup of sediment or debris.
Damage or Improper Installation
Damage or improper installation may lead to leaks and poor water flow. Before installing a fresh filter, make sure to inspect it for any signs of damage or wear-and-tear, and ensure that it is firmly seated in the base before use.
The Cost of Replacing a Frigidaire Water Filter
Replacing your Frigidaire Water Filter doesn’t have to be expensive. Costing anywhere between $10 and $250, you can find the right filter for your budget. Plus, by shopping online you can often find some of the filters at a discounted rate of 10-20%.
Remember that it’s recommended to replace your Frigidaire Water Filter every six months. So make sure you’re stocking up and taking advantage of discounts online to save yourself time and money on future replacements.
How Often Should You Change Your Frigidaire Water Filter?
If you own a Frigidaire refrigerator, how often should you change the water filter? It is recommended that you replace your filter every 6 months, but this can vary depending on your usage and water quality. Most models of Frigidaire refrigerators come with a Water Filter Status indicator that alerts you when it is time to change the filter. Regularly replacing the filter ensures that any potential contaminants are removed from your system and that the taste of the water remains consistent. Additionally, using a new filter will also maximize the efficiency and performance of your fridge.
If you’re unsure about when to replace your filter, look for the Water Filter status indicator light on your fridge or consult any online resources that are specific to your model of Frigidaire refrigerator. Following these guidelines will help ensure that you get the most out of your refrigerator’s water filtration system while providing clean, safe drinking water for years to come.
Tips for Handling and Installing a New Frigidaire Water Filter
A Frigidaire water filter replacement is an easy task that can be completed quickly and safely. For best performance, start by changing the filter every six months. By doing this, you can guarantee that your water will always be pure and untainted.
Here are some instructions for taking care of and setting up a fresh Frigidaire water filter:
- Twist off the filter cover with one hand to detach the old filter by pulling it downward with the other hand.
- Clean all surfaces with a damp cloth before and after installation to remove dust and debris, as deposits on the filter can reduce its effectiveness over time.
- Replace the old filter with a new one of the same size and type, ensuring that it is firmly attached and secure in place.
- Make sure both ends of the hose are firmly connected, as incorrect installation can cause leaks which can be difficult to detect until they have caused damage to your appliances or home.
- Turn on your cold water tap and let it run for at least 5 minutes before using it to flush out any air or sediment in the system.
- Check regularly that your Frigidaire filter is operating correctly – this should be done every six months – paying attention to any changes in taste or odor as well as any discoloration in your drinking water supply or ice cubes coming from your fridge freezer’s ice maker compartment. By following these simple steps you will keep your Frigidaire working optimally for many years to come.
People Also Like: How Long Can a Garbage Disposal Last for Maximizing Lifespan
Conclusion
In conclusion, changing the water filter in a Frigidaire refrigerator is a straightforward process that requires basic knowledge and a few simple steps. Taking the time to understand the model of your Frigidaire refrigerator, however, can ensure that you can safely and quickly complete this task without any issues. Also, make sure to inspect the filter regularly and replace it when necessary to ensure that your refrigerator is running efficiently and effectively.
